The Drive Shaft Repair process is very important. If your vehicle has issues more often than not the drive shaft can be problematic and you have to fix it. If the driveshaft just doesn’t work the way it should, it can end up being super demanding and your vehicle will malfunction more and more.
Call Now 661-679-7957 to schedule an Appointment!
What should a broken drive shaft repair cost?
Usually, the Drive Shaft Repair costs will differ based on what caused the issue and how fast it can be repaired. If you just have to replace it, that would be anywhere from $500 to $1000. However, you can also expect the cost of the parts to be around half that number and the labor costs around $200. So even for a simple repair, you can end up with around $1500-$1700 invested in the Drive Shaft Repair process. That might not feel like much, but it can be an issue if you want to avoid expenses like this.
If you are only repairing a half section or half the shaft, then the prices will differ. This can cost anywhere from $350-$850 depending on location. Again, the cost of parts is around average for all repairs. with labor topping out the rest of the cost at $150-$250 depending on the service center, state, and taxes for that state.
With rear-wheel drive vehicles or 4-Wheel Drives, the cost will increase. On average the price for this kind of repair on this type of vehicle will come in somewhere in the range of $700-$1800
How to save money on this repair:
Do the research. It may be tempting to perform a driveshaft repair on your own. If you don’t however have the proper tools then attempting a drive shaft repair on your own will end up costing you more money in the long run.
Steps to take:
- Compare prices with your local repair shops.
- Ask for a quote. When you do ask for the parts that will need to be purchased and see if buying the parts on your own is a cheaper option.
- Ask the repair shop if they will discount the repair if you bundle it with other maintenance items. (always worth a shot)
Visit our Facebook Page Here
Repairing a Fractured Drive Shaft: An Inevitable Endeavor?
CAUTION: The mending of a drive shaft is a pivotal undertaking concerning your vehicle, fraught with potential repercussions if the rectification or substitution falters.
Primarily, you must extract the driveshaft from your automobile or truck. Scrutinize the anterior yoke for indications of deterioration. This assessment will apprise you of the necessity to replace the rear seal within the transmission. Firstly, you must maneuver the driveshaft toward one extremity to dislodge the bearing cup. Subsequently, invert it and replicate this process if feasible. It is of paramount importance to ensure the presence of a means to bolster the assembly. A substantial cinder block shall suffice. Thereafter, you shall embark on the removal of the bearing cups from the fresh joint and then commence the insertion of one into the driveshaft. This procedure demands gradual execution as you endeavor to conclude it.
If you decide that the DIY route is the way that you want to go, there are some basic essentials that you will need. Consider having the following too at the ready when conducting a drive shaft repair on your own.
Tools You May Need:
Torsion Bar Unloading Tool:
This remarkable contrivance allows for the safe disassembly of torsion bars, a task often fraught with peril. Its specialized design ensures the release of tension without compromising safety.
Universal Joint Press Kit:
When dealing with drive shafts, the integrity of universal joints is paramount. A high-quality press kit ensures the precise installation of these critical components, enhancing the longevity of your repair.
Bearing Cup Installer:
The intricacies of drive shaft repair necessitate precision. A bearing cup installer, often overlooked, facilitates the seamless installation of bearing cups, minimizing the risk of damage during the process.
Digital Caliper with Micrometer:
In the realm of automotive repair, precision reigns supreme. A digital caliper with micrometer capabilities allows for accurate measurements, ensuring that components fit snugly and function optimally.
Thermoplastic Welding Kit:
Occasionally, drive shafts may require thermoplastic welding for mending. Investing in a quality welding kit equipped with specialized thermoplastic rods can be a game-changer for such repairs.
High-Strength Thread Locker:
When reassembling components, the reliability of fasteners is paramount. Opt for a high-strength threadlocker to safeguard against loosening due to vibration and stress.
Drive Shaft Balancing Kit:
Achieving the ideal balance in your drive shaft is critical for smooth operation. A balancing kit designed for drive shafts will aid in fine-tuning this aspect of your repair.
Remote Borescope Inspection Camera:
For comprehensive inspections of hard-to-reach areas within the drive shaft, a borescope inspection camera is invaluable. It provides visual access to assess any hidden issues.
Advanced Lubricants:
Consider specialized lubricants formulated for drive shaft components. These lubricants are engineered to withstand the unique demands of drive shafts and can significantly extend their service life.
Professional-Grade Diagnostic Scanner:
In the modern era of automotive technology, a diagnostic scanner is indispensable. Invest in a professional-grade scanner that offers in-depth insights into your vehicle’s systems, aiding in pinpointing potential drive shaft-related issues.
Conclusion
Ultimately, the process of Drive Shaft Restoration may appear daunting, yet you can accomplish it with commendable outcomes. It does require a period of acclimatization. Nevertheless, the endeavor can be immensely rewarding. Your sole responsibility lies in investigating and selecting the appropriate Drive Shaft Repair entity to provide guidance throughout this undertaking!
